Specifications - AirField Systems

Explore the references and specifications that verify the AirDrain^™ results in the field.

56765A TSI Testing Gmax on cement

62197 Gmax Concrete 1 1.8 inch Pad Fall Height 5 ft No Infill

62198 ASTM F1292 Gmax 2 1.8 inch pad

62198 Gmax HIC 2 Inch Pad Playground on Cement No Infill 8'

62296 ASTM F1292 Gmax Concrete 2 1.8 inch Pad 9'

62296 Gmax Concrete 2 1.8 inch Pad AirDrain NoInfill 9 ft Fall Height

62197 ASTM F1292 HIC Gmax Concrete 1 1.8 inch Pad Fall Height 5 ft No Infill

65981 ASTM 355A Gmax MSP 69 .75 pad aggregate 81 GMAX

66990 ASTM 355A Gmax; MSP 69 with 2.0 lbs Envirofill

70743 ASTM F355a Gmax Playsafe 50 Shaw 99 GMAX

70789 ASTM F3189 Deformation Advanced Artificial Athlete PlaySafe 50 w AirDrain Syst...

84301B ASTM F355a Gmax, AT755E w 5mm Foam over AirDrain

91012 ASTM F355a Gmax CEMENT AirDrain SYNLawn X47 1 58th blade 128 0z total weight Turf 2lbs. Envirofill 130

91668 ASTM F1292 Gmax; SYNLawn Augustine X47 AirDrain SYNLawn X47 1 58th blade 128 0z total weight Turf 2lbs. Envirofill 5Ft Fall Height on Aggregate 3 temperatures tested

AirDrain Drainage ASTM D4716 Synthetic Grass and Natural Grass Testing with Lab Results

AirDrain FR E-108 Class A Rated with ZERO SPREAD of FLAME Brochure

AirDrain Water Flow Testing and Transmissivity (ASTM D 4716 and ISO 12958)

AirDrain-for-Synthetic-Turf-Playground-6ft.-Fall-Height-ASTM-Tested-No-Infill-Solution

AirField Systems AirDrain for SYNLawn Installations 2019

AirPanel Cross Section and MSDS

ASTM Proposed Rational for turf playing system using e missile to measure impact attenuation in values of G and HIC

ASTM Proposed Test Methods For Measurement of Synthetic Turf System Infill Depths in the Laboratory and Field using a Constant Ground Pressure 3-Prong Gauge

GMAX Cement X47 Turf 2lbs. Infill 130 GMAX 2.3.23

GMAX for Synthetic Turf with Reports TSI

Playground Impact Testing

Sport Pro Plus 48 with 3.0 lbs. per SqFt Envirofill Installed With AirDrain

SYNLawn SR200 with Airdrain ASTM E108 Class A Rated Spread of Flame Testing

*These drawings, specifications and the information contained herein are for general presentation purposes only. All final drawings and layouts should be determined by a licensed engineer(s). HIC & Gmax testing are measured in a lab setting and are not site specific.

AirField Systems specifications are also available on CAD Details.

Do not show again